January 31, 2014


Introduction to Stellaris LaunchPad

Basic introduction to the features of LM4F120H5QR based Stellaris LaunchPad Development Board. This is the best place for a newbie to start experimenting with ARM based microcontrollers.


Tutorial 1 – Blink

This tutorial will give you a basic introduction to how to configure GPIO using the example of blinking an led.


Tutorial 2 – Using Button Switch

This tutorial is a basic tutorial through which I wish to teach you how to take in input using the Stellaris LaunchPad. For this tutorial, I will be using the one of the two on board switches named SW2 as the input.


Tutorial 3 – Using locked Pin for GPIO usage

In this tutorial, we will be try to use a normally locked pin as a general input pin. But right now, i am interested in blinking an LED using a NMI (Non Maskable Interrupt) pin. Actually, it is easy, but a newbie wont be able too find how to do it easily. This is what forced me write this tutorial.


Tutorial 4 – Serial Communication

This tutorial is about how to enable and properly configure UART on your Stellaris LaunchPad. This tutorial is the first of its kind and is exclusively meant for teaching how to write into a serial stream, how to set the baud rate parity bit, stop bit etc. These tutorials may at the first look seems useless but I only mean to teach you the basic concepts of how to program the ARM based microcontroller.

3 thoughts on “Stellaris

  • Hi there, I found your website by the use of Google while searching for a comparable subject,
    your website came up, it appears great. I have bookmarked it in my google bookmarks.

    Hi there, just turned into alert to your weblog
    through Google, and found that it is really informative.
    I am gonna watch out for brussels. I will appreciate in the event you proceed
    this in future. Numerous folks will be benefited out of your writing.

  • Have you ever thought about adding a little bit more than just
    your articles? I mean, what you say is valuable and everything.
    However think about if you added some great pictures
    or video clips to give your posts more, “pop”!

    Your content is excellent but with images and videos,
    this blog could undeniably be one of the best in its niche.
    Great blog!

Leave a Reply

Your email address will not be published. Required fields are marked *